24,000 lb. Aluminum Six Post Pile Mount Lift
$ 15,532.15
SKU: 84890
UPC: 091037848901
Only 1 left in stock
Special Order
Stock Policy
Shipping Policy
Return Policy
24,000 lb. Aluminum Six Post Pile Mount Lift
The 24,000-pound aluminum six-post pile mount boat lift from BH-USA is a heavy-duty lift that can accommodate boats of up to 24,000 pounds. It is made of 6061-T6 US aluminum, which is a strong and corrosion-resistant material. The lift has a 33-foot cable compounded configuration, which results in a 24,000-pound lift capacity rating.
The boat lift mounts to six pilings and features a no-weld design. It also has maintained drum switches and 110-volt motors. The lift comes with an in-line GFCI control cable and ships freight in a crate.
Benefits:
- The 24,000-pound lift capacity can accommodate most boats.
- The aluminum construction is strong and corrosion-resistant.
- The no-weld design makes the lift easy to assemble and maintain.
- The maintained drum switches prevent the lift from running out of control.
- The 110-volt motors are energy-efficient and quiet.
- The in-line GFCI control cable provides safety protection.
Maintenance:
The 24,000-pound aluminum six-post pile mount boat lift is a low-maintenance lift. The only regular maintenance required is to inspect the lift for any signs of wear or damage. You should also clean the lift regularly to remove dirt and debris.
Overall, the 24,000-pound aluminum six-post pile mount boat lift from BH-USA is a high-quality lift that is perfect for boats of up to 24,000 pounds. It is made of durable materials and is easy to install and maintain. The lift is also backed by a one-year warranty. If you are looking for a heavy-duty boat lift that can accommodate your large boat, then the BH-USA 24,000-pound aluminum six-post pile mount boat lift is a great option.
Bracket long bolts for pilings not included.
| Lifting Capacity | Gear Ratio | Motor Horsepower | Motor Finish | Piling Amount | Cable Configuration | Cable Thickness | Cable Length |
|---|---|---|---|---|---|---|---|
| 6,000 lbs. | 40:75 | 3/4 HP | Stainless steel | 4 | Straight-Line | 5/16 in. | 15 ft. |
| 8,000 lbs. | 40:75 | 1 HP | Stainless steel | 4 | Straight-Line | 5/16 in. | 15 ft. |
| 9,000 lbs. | 40:75 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 12,000 lbs. | 40:90 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 16,000 lbs. | 40:90 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 20,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 20,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 6 | Compounded | 5/16 in. | 33 ft. |
| 24,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 6 | Compounded | 3/8 in. | 33 ft. |
| 30,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 8 | Compounded | 3/8 in. | 36 ft. |
| All aluminum pile mount boat lifts include a BH-USA A-Drive direct-drive hoist and a c-face input wired boat lift motor. | |||||||
Specifications
General Specifications |
|||
| Lifting Capacity: | 24,000 lbs. | Dock Piling Req.: | 6 |
| Cable Configuration: | Compounded | Piling Min. Width: | 8 in. (dia) |
| Cable Diameter: | 3/8 in. | Min. Piling Height (Above Pier): | 4 ft. |
| Cable Length: | 33 ft. | UL File: | E464499 |
| Cable Material: | Stainless Steel | Limiit Switch Bracket: | Included (Switch Optional) |
| Motor #1 Cable-to-Plug Length: | 16 ft. | Motor #2 Cable-to-Plug Length: | 45 ft. |
| Cable Winders: | Single Directional | Drive Pipe ID: | 1.5 in. |
Top Beam |
|||
|---|---|---|---|
| Lifting Capacity: | 12,000 lbs / Beam | Top Beam Dimensions: | 15 ft. L x 3 1/2 in. W x 7 in. H |
| Top Beam Type: | Channel | Top Beam Material: | 6061-T6 US Aluminum |
| Drive Pipe Finish: | Hot-Dipped Galvanized | Drive Pipe Type: | Sch. 40 |
| Beam Weight: | 4.715 lbs. / ft. | Pipe Bearings: | 5 / Beam |
| Pipe Bearings Material: | Bronze | Bearing Maintenance | Grease Fittings |
| Grease Fitting Size: | 1/4 in. | ||
| Cable Winders: | 2 | Cable Winder Style: | Side-Mounted (Boat Lift Style) |
| Cable Winder Type: | Single Direction | Cable Winder Fits: | 1.5 in. ID Drive Pipe |
| Drive Pipe Dimensions: | 14 ft. 6 in. L (1,5 in. ID) | Fasteners | Stainless Steel |
40:90 A-Drive Gearbox |
|||
| Gearbox Type: | Double Worm Reduction | Gear Type: | 40:90 (High Efficiency) |
| Weight: | 38.3 lbs. | Case Material: | Cast Aluminum |
| Gearbox Length: | 12.42 in. | Box Type: | Fully Enclosed |
| Gearbox Width: | 7.56 in. | Lube: | Specialty-blended Grease |
| Gearbox Height: | 14.57 in. | Warranty: | 5 Years |
| Actual Ratio: | 450:1 | Output Shaft: | 1.25 in. |
| Motor Mount Type: | NEMA 56c | Input Motor Shaft: | 0.625 in. (5/8) |
| Pipe Flange Box Length: | 9.37 in. | Pipe Bolt Mount Hole-to-Bolt: | 4.59 in. |
| Pipe Flange Box Width: | 7.58 in. | Motor Mount Hole-to-Hole Mount: | 4.15 in. |
| Pipe Flange Box Height: | 8.11 in. | 1 1/2 HP Output Torque: | 7.399 in. / lbs. |
| Motor Mount Bolt Holes: | 4 | Motor Mount Bolt Size: | 0.4375 in. (7/16) |
1.5 Elite TENV Stainless Electric Motor |
|||
| Weight: | 37.35 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 11.75 in. | Product Width: | 6.50 in. |
| Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93049 | Retail SKU: | 93100 |
| HP: | 1 | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 15.4 (115v) / 7.7 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 17.6 (115v) / 8.8 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | E |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
| Electrical Type: | Capacitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 10.0 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Boat Lift Switch |
|||
| Model #: | CA0200034I-B96IQ6R | Switch Type: | Maintained |
| Weight: | 1.25 lbs. | Box Color: | Light Grey |
| Housing Length: | 4.5 in. | Housing Width: | 3.5 in. |
| Housing Height: | 4.5 in. | Handle Color: | Red |
| Handle Length: | 3.0 in. | Handle Width: | 1.1875 in. |
| Handle Height: | 1.3125 in. | Country of Origin: | Italy |
| Amps: | 20 | VAC | 600 |
| Torque: | Tight | Certification: | EN 60947-3 |
| Certification: | CE | Certification: | C-UL-US Listed |
GFCI Wire Harness |
|||
| Voltage: | 220v | Plug Type: | US 240 Volt NEMA 6-15 |
| VAC: | 240 | Hz: | 50/60 |
| Amps: | 15 | Watts: | 3600 |
| Type: | Rainproof Class A | GFCI Type: | In-line |
| Cable Type: | 14/5 SJTW | GFCI to Plug: | 4.5 in. |
| Cord Diameter Range: | 0.28 – 0.65 in. | Country of Origin: | Honduras |
| UL: | Listed | CSA: | Certified |
| Reset Button: | Yes | Reset Type: | Automatic |
| BH-USA SKU: | 12228 | Catalog #: | 25090 |
10 in. x 16 ft. Aluminum Cradle Beams w/ Sheave Housings |
|||
| Material: | Aluminum | Type: | 6061-T6 US |
| Style: | Marine-grade extruded | Beam Type: | Structural |
| Web Size (A): | 10 in. | Flange Size (B): | 6 in. |
| Web Thickness (C): | .250 in. | Flange Thickness: | .410 in. |
| Beam Wt./Lin Ft.: | 8.646 lbs. (per ft.) | Accepts: | 4 in. Aluminum Sheave |
| Sheave Housing Dimensions: | 10 in. web x 6 in. flange | Sheave Bolt Bore: | 0.75 in. (3/4 in.) |
| Material: | Aluminum | Ships: | Freight |
| Fasteners Material: | 316 stainless steel | Bolt Type: | Hex Head |
| Bolt Amount: | 4 | Bolt Size: | 0.5 in. x 2.5 in. |
| Washer Type: | Lock | Nut Type: | Threaded |
| Washer Size: | 1/2 in. | Nut Size: | 0.50 in. |
| Washer Amount: | 4 | Nut Amount: | 0.50 in. |
10 in. x 16 ft. Cradle Bunks |
|||
| Material | Aluminum, 6061-T6 US Marine-grade | Bunk Type | Cradle |
| Length | Varies (8 ft. – 16 ft.) except 20 ft. (Local Pickup Only) | Padding Material | Rubber, Non-marking, Black |
| Bunk Height | 10 in. | Bunk Angle | 19 degrees |
| Weight (8 in.) | 3.759 lbs. per linear ft. | Rust Resistance | Yes |
| Shipping | Freight (Except 20 ft.), Local pickup for 20 ft. | Sold Individually | Yes |
10 in. Aluminum Guidepost Stanchion Kit |
|||
| Size: | 10 in. | Dimensions: | 28 in. L x 1 15/16 in. |
| Inner Diameter: | 1 3/16 in. | Material: | Aluminum |
| Thickness: | 3/8 in. | Accepts: | 2 in. ID PVC Pipe |
| Backup Plate Dimensions: | 14 in. L x 2 in. (per flange) | Mounting Holes: | 2 (through the pipe) |
| Hole Size: | 9/16 in. | Measurement Between Holes: | 11 in. (center-to-center) |
| Bolt Type: | Hex head | Bolt Material: | Stainless steel |
| Bolt Size: | 1/2 in. x 10 in. | Washer Type: | Lock |
| Washer Material: | Stainless steel | Washer Size: | 1/2 in. |
| Nut Material: | Stainless steel | Nut Size: | 1/2 in. |
80 in. Guideposts & 48 in. Guidepost Bumpers |
|||
| Material: | PVC | Rating: | ASTM D 2665 |
| Compound: | PVC 1120 Type 1 Sch. 40 | Width: | 2 3/8 in. (2 in. ID) |
| PSI: | @ 23° C | Thickness: | 0.1875 in. (3/16 in.) |
| Top Cap Modification: | Drilled | Length: | Varies |
| Hole Size: | 0.25 in. (1/4 in.) | Color: | White |
| Hole Reason: | Drain Water | Post Length: | 80 in. |
| Bumper Length: | 48 in. | Diameter: | 2 3/8 in. |
| Material: | Vinyl | Type: | Highly-Visible |
| Tread: | 200 Denier | Color: | Black |
Product Overview
- Heavy-duty construction
- Made of corrosion-resistant aluminum
- 33-foot cable compounded configuration
- No-weld design
- Maintained drum switches
- 110-volt motors
- In-line GFCI control cable
