Dual Direction Cable Winders
The Dual Direction Cable Winders are designed to fit over 2 3/8 in. OD (2 in. ID) drive pipes mounted in the center of the boat lift. These would include boat house style lifts. Installs where drive pipes are mounted in the center of the slip using (4) pulleys or one pipe on the side with (2) pulleys on the other side. 16 ft. cable winding split in (2) 7 ft. sections that wrap 14 ft. of 7 x 19 aircraft cable per side. Wraps up to 5/16 in. thick 7 x 19 boat lift cable. Fits 19 wraps per side. Holds 28 ft. total cable. 14 ft. per side. Includes mounting bolts and nuts for installation.
To install the solid cable winder, you must remove drive pipe from hoist and slide into place. The split cable winder can be installed before or after the drive pipe is installed to the boat hoist.
Specifications
General Specifications |
|||
---|---|---|---|
Design: | Center-Mounted Drive Pipes | Material Type: | Sch. 40 |
Length: | 16 in. | Cable Hole Size: | 0.375 in. (3/8 in.) |
Width: | 2.875 in. ( 2 7/8 in.) | Cable Hole Amount: | 2 |
Height: | 2.875 in. ( 2 7/8 in.) | Cable Hole Placement: | Center |
Weight: | 2.4 lbs. | Cable Groove: | 0.28125 in. (9/32 in.) |
Cable Winder OD: | 2.875 in. ( 2 7/8 in.) | Cable Wraps: | 19 (per side) |
Cable Winder ID: | 2.375 in. (2 3/8 in.) | Cable Max. Length: | 14 ft. (per side) |
Wall Thickness: | 0.25 in. (1/4 in.) | Total Cable Length: | 28 ft. |
Fastener Material: | Stainless Steel | Washer Amount: | 2 |
Material Type: | 316 | Washer Size: | 0.3125 in. (5/16 in.) |
Bolt Amount: | 2 | Nut Amount: | 2 |
Bolt Width: | 0.3125 in. (5/16 in.) | Nut Size: | 0.3125 in. (5/16 in.) |
Bolt Length: | 3.25 in. (3 1/4 in.) | Type: | Dual Direction |
Product Guides
Product Overview
- 2 7/8 in. OD (2 3/8 in. ID)
- Holds 28 ft. of cable - 14 ft. per side
- Dual direction winder - 7 in. per side
- It fits BH-USA dual-pipe supports
- Made from 6061-T6 US aluminum
- Handles up to 5/16 in. thick cable