Marathon 3/4 HP Painted Electric Motor
Only 10 left in stock
Marathon 3/4 HP Painted Electric Motor
Marathon’s 3/4 HP Painted Electric Motor is a single-phase, dual voltage motor with a start capacitor. The motor is factory-wired to run at 220 volts. A licensed electrician can rewire the motor to run at 110 volts. Compatible with all BH-USA flat-plate hoists and gear plates.
The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.
This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.
Clawfoot Motors
A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.
Specifications
| Model #: | 5KC42JN0214 |
| Max Run Time: | 15 Minutes |
| Dimensions: | 8 1/2 in. x 10 1/2 in. x 6 1/2 in. |
| Weight: | 24 lbs. |
| Horsepower: | 3/4 HP |
| Mounting Type: | 56 Frame |
| RPM: | 1725 |
| Service Factor: | 1 |
| Voltage: | 115/230 |
| Phase: | 1 |
| Amps: | 11.4 (110v) / 5.6 (220v) |
| SFA: | 12.4 (110v) / 6.2 (220v) |
| Herz: | 60 |
| AMB: | 40°c |
| Frame: | 56 |
| HSG: | TENV |
| Code: | K |
| Insulation: | B |
| Shaft Diameter | 5/8 in. |
Product Overview
- Flat-plate mounting design
- NEMA 56 electric motor
- UL Listed & CSA approved
- TENV – totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- Powder-coated black from the factory
- 15 min. maximum run time
