Elite 3/4 HP Painted Wired PWC Motor
Only 20 left in stock
Elite 3/4 HP Painted Wired PWC Motor
The Elite 3/4 HP Painted Wired PWC Motor is a factory-wired electric motor attached with a Bremas rotary cam momentary switch, an inline GFCI, with 6 ft. of cord from GFCI to plug. This motor is wired to work with the BH-360 PWC Lift or other PWC hoists that use an electric motor with a base. The wired motor includes a 2 in. Drive belt pulley.
The motor is a single-phase, dual-voltage motor. The motor is a 110V electric motor. The motor is built from rolled steel. The NEMA 56 shaft is 0.625 inch thick and 1.88 inch extruding from the motor housing. UL Recognized (C-UL-US). It uses a capacitor to start.
TENV (totally enclosed, non-ventilated) housing. TENV housing prevents dirt, insects, and water from entering the motor. 15 minutes maximum runtime. Includes 1 inch long x 1/4 inch wide keystock, colored T-wires, easy-to-follow wiring instructions, BH-USA equipment guide, and wiring instructions.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 20.55 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.75 in. |
| Product Height: | 8.50 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93197 | Retail SKU: | 79601 |
Nameplate Specifications |
|||
| HP: | 0.75 (3/4) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 10.8 (115v) / 5.4 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56 | Service Factor: | 1.0 |
| SFA: | N/A | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | L |
| Insulation: | B | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | cRUus |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 7.1875 in. | Mounting: | Resilient Base – Extended Studs |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Replacement Capacitor: | 465 uF |
| Capacitor SKU #: | BH02247 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Switch General Specifications |
|||
| Momentary | |||
| Model #: | CA0200034I-B96IQ6R | BH-USA SKU #: | BH09015 |
| Housing Length: | 4.5 in. | Handle Length: | 3 in. |
| Housing Width: | 3.5 in. | Handle Width: | 1.1875 in. |
| Housing Height: | 4.5 in. | Handle Height: | 1.3125 in. |
| Box Color: | Light Grey | Handle Color: | Red |
| Country of Origin: | Italy | Weight: | 1.25 lbs. |
Technical Specifications |
|||
| 110v | |||
| Amps: | 20 | Certification: | EN 60947-3 |
| VAC | 600 | Certification: | CE |
| Torque: | Tight | Certification: | C-UL-US Listed |
Cam Diagram |
|||
| — | 230v | 400v | 690v |
| AC3-kW(A) 1 ph | — | 3.7(12) | — |
| AC3-kW(A) 3 ph | 4(13) | 7.5(14) | 7.6(8) |
| AC-23-kW(A) 1 ph | 3(17) | — | — |
| AC-23-kW(A) 3 ph | 6.5(17) | 9(9) | 9(9) |
VAC Diagram |
|||
| HP/V | 1 ph | 3 ph | — |
| 120 | 1.6 | — | — |
| 200 | — | 5 | — |
| 240 | 3 | 7.5 | — |
| 480 | — | 10 | — |
| 600 | — | 10 | — |
GFCI Wire Harness Specifications |
|||
| 110v | |||
| Manufacturer: | Southwire Company | GFCI to Plug: | 4.5 in. |
| Plug Type: | 3-US 110 V Standard | Cord Dia. Range: | 0.28 in. – 0.65 in. |
| VAC: | 125 | Country of Origin: | Honduras |
| Hz: | 60 | UL: | Listed |
| Amps: | 15 | CSA: | Certified |
| Watts: | 1875 | Reset Button: | Yes |
| Type: | Rainproof Class A | Reset Type: | Automatic |
| GFCI Type: | In-line | BH-USA SKU: | 12211 |
| Cable Type: | 14/5 SJTW | Catalog #: | 303385214 |
Product Overview
- Clawfoot motor (flat-plate hoist/gear plate motor)
- Includes 110v in-line GFCI
- 6 ft. control cable from motor to drum switch
- Features a momentary (spring) drum switch
- Low profile motor design
- 3,500 lbs. lifting capacity
