Elite 1 HP Painted Wired Boat Lift Motor
Elite 1 HP Painted Wired Boat Lift Motor are single-phase motors with start capacitors. Standard duty motors. Factory-wired for 220 volts. An electrician can rewire it to 110 volts. Fits all BH-USA flat-plate hoists and gear plates. Fits other brands using the standard 4 ft x 2 ft flat-plate mounting holes. NEMA 56 frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. TENV housing prevents dirt, insects, and water from entering the motor. Maximum runtime: 15 minutes. Finished in black. Includes colored T-wires. Includes easy-to-follow instructions. Equipment guide and wiring instructions included. A motor wire harness is installed directly on the electrical motor. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.
Clawfoot Motors
A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.
It is BH-USA’s recommendation to hire a licensed electrician for wiring or rewiring electrical components. Return policy.
Standard Series | |||||||
Name: | BH-30 | BH-40 | |||||
GPA: | 4,000 lbs | 4,000 lbs | |||||
HP: | 3/4 | 1 | |||||
Duty: | Standard | Standard | |||||
Worm: | Bronze | Bronze | |||||
96 Tooth: | Cast Iron | Cast Iron | |||||
Block: | Short | Short | |||||
Pulley: | Single | Single | |||||
Deluxe Series | |||||||
Name: | BH-35 | BH-45 | BH-65 | ||||
GPA: | 6,500 lbs | 6,500 lbs | 6,500 lbs | ||||
HP: | 3/4 | 1 | 1 | ||||
Duty: | Standard | Standard | HD | ||||
Worm: | Bronze | Bronze | Bronze | ||||
96 Tooth: | Cast Iron | Cast Iron | Cast Iron | ||||
Block: | Extended | Extended | Extended | ||||
Pulley: | Single | Single | Single | ||||
Advanced Series | |||||||
Name: | BH-75 | BH-85 | |||||
GPA: | 7,500 lbs | 8,500 lbs | |||||
HP: | 1 1/2 | 1 1/2 | |||||
Duty: | Standard | Standard | |||||
Worm: | Steel | Steel | |||||
96 Tooth: | Bronze | Bronze | |||||
Block: | Extended | Extended | |||||
Pulley: | Single | Dual | |||||
All Flat-Plate Hoists use Elite Motors painted wired boat lift motors. |
Specifications
Motor | |||
Brand: | Elite Motors | ||
Horsepower: | 1 |
||
Frame: | 56 | ||
RPM: | 1725 | ||
SF: | 1 | ||
Voltage: | 115v / 230v | ||
Phase: | 1 | ||
Amps: | 7.8 | ||
SFA | 6.2 | ||
Herz: | 60 | ||
AMB: | 40°c | ||
HSG: | TENV | ||
Code: | L | ||
Insulation: | A | ||
Max. Run Time: | 15 min. | ||
Finish: | Painted | ||
Shaft Dua: | 5/8 in. | ||
Electric Motor Wire Harness | |||
110v Plug: | 3-US 110v Standard | ||
220v Plug: | US 240v NEMA 6-15 | ||
Switch Size: | 3.5″ x 4.5″ x 4.5″ | ||
Max. Amps: | 20 | ||
Max. HP: | 1 1/2 | ||
Compliance: | UL, NEMA, CE, SA | ||
VAC: | 120-240 | ||
Box Color: | Gray | ||
Material: | Plastic | ||
Handle: | Red | ||
Type: | Maintained / Momentary | ||
Cable: | 14/5 SJTW | ||
GFCI-to-Plug: | 4 1/2 in. | ||
Box-to-GFCI: | 60 in. | ||
Class: | A-Rainproof | ||
Amp: | 15 | ||
Hz: | 60 | ||
Voltage: | 125v / 240v | ||
Reset: | Automatic | ||
Cord Dia.: | .28 – .65 | ||
Motor Pulley | |||
Size: | 2 in. x 2 in. x 2 in. | ||
Material: | Aluminum | ||
Bore Size: | 5/8 in. (.630 in.) | ||
Type: | Center bore | ||
Set Screw: | 3/8 in. | ||
Thread: | 16 (coarse) | ||
Build: | Machined | ||
Fits: | Single |
||
Mount: | 56-Frame |