Elite 1 HP Stainless C-Face Wired PWC Lift Motor
The Elite 1 HP Stainless C-Face Wired PWC Lift Motor is a single-phase, dual voltage motor. Stainless steel finish. Includes start capacitor. Direct drive mounting pattern. Compatible with our A-Drive direct drive boat hoists. Aluminum end bells included. Double shielded ball bearings. Dynamically balanced rotor.
NEMA 56C enclosure with IP-55 protection. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing keeps dirt, insects, and water out.
Max runtime is 15 minutes. Finished in black. Includes colored T-wires. Comes with easy-to-follow instructions. Includes BH-USA’s equipment guide and wiring instructions.
A motor wire harness is installed directly on the electrical motor. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.
C-Face Style Motors
The C-Face motor is a common mechanical standard in America. A rugged flange makes mounting the motor easier. The flange supports the motor’s weight. Usually attached to the gearbox. Cantilevering the motor is possible due to the strength of the flange.
This NEMA C-Face mount includes a machined-face flange and a pilot on the end of the shaft for direct coupling with equipment. A motor’s mounting face has threaded holes for bolts.
|Voltage:||115v / 230v|
|Amps:||15.6 (115v) / 7.8 (230v)|
|SFA||17.5 (115v) / 8.75 (220v)|
|Max. Run Time:||15 min.|
|Shaft Dua:||5/8 in.|
|Electric Motor Wire Harness|
|110v Plug:||3-US 110v Standard|
|220v Plug:||US 240v NEMA 6-15|
|Switch Size:||3.5″ x 4.5″ x 4.5″|
|Max. HP:||1 1/2|
|Compliance:||UL, NEMA, CE, SA|
|Type:||Maintained / Momentary|
|GFCI-to-Plug:||4 1/2 in.|
|Voltage:||125v / 240v|
|Cord Dia.:||.28 – .65|
|Size:||2 in. x 2 in. x 2 in.|
|Bore Size:||5/8 in. (.630 in.)|
|Set Screw:||3/8 in.|
- C-Face mount (direct-drive style)
- IP-55 NEMA enclosure
- UL listed
- Momentary (spring) switch
- Fits direct shaft inputs
- 6 ft. control cable
- Stainless steel housing