1.5 HP Elite TENV Stainless Electric Motor
The 1.5 HP Elite TENV Stainless Electric Motor is a single-phase, dual-voltage boat lift motor. The motor is a baseless motor that can be mounted directly onto gearboxes, such as the A-Drive and E-Drive gearboxes, without needing a separate base. Made from stainless steel housing and features aluminum end plates that resist corrosion and rust. The heavy marine-grade gasket on the stainless steel capacitor housing helps keep water and dust out. Easy to wire with standard yellow T-Wires and works with any known drum switch or boat lift remote.
The 1.5 HP Elite TENV Stainless Electric Motor can be used on any known Boat Hoist with standard C-Face or C56 flange mount including the BH-USA A-Drive, E-Drive Golden Lift Sea-Drive, AMS Hefty Hoist E-Drive and A-Drive and also can be used on hoists used by Deco Lifts, Hi-Tide Lifts, Neptune Lifts and Hurricane Boat Lifts All Elite Boat Lift Motors come with detailed wiring instructions for Elite, Breams and Salzer brand Drum Switches. All Elite Boat Lift Motors are fully compatible with GEM Boat Lift Remotes, Galaxy Boat lift Remotes, TED Boat Lift Remotes and Elite Boat Lift Remotes. The 1.5 HP Elite TENV Stainless Electric Motor is equivalent to the Leeson boat hoist motor #6439191252
This motor has a power of 1.5 horsepower (HP) and can run on either 115 volts or 230 volts. At 115 volts, it draws 15.4 amps, and at 230 volts, it draws 7.7 amps. It rotates at a speed of 1725 revolutions per minute (RPM) with a frequency of 60 Hz. It fits into frame 56c and has a service factor of 1.15. It can handle up to 17.6 amps at 115 volts or 8.8 amps at 230 volts. It’s designed to withstand temperatures up to 40°C for a maximum of 15 minutes. The housing is Totally Enclosed Non-Ventilated (TENV) with a code of E. It has insulation class F and an IP rating of 54. it is also recognized by UL with a C-UL-US stamp.
Totally Enclosed Non-Ventilated (TENV)
A Totally Enclosed Non-Ventilated motor is a type of electric motor that is enclosed to prevent the ingress of foreign particles (dust, moisture, etc.) but does not have external ventilation openings for air circulation. Unlike some other motor types, TENV motors do not rely on external airflow for cooling and are designed to operate in a sealed environment.
Specifications
General Specifications |
|||
---|---|---|---|
Weight: | 37.35 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
Product Length: | 11.75 in. | Product Width: | 6.50 in. |
Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
Shaft Length: | 2 in. | Country of Origin: | China |
Model #: | 93049 | Retail SKU: | 93100 |
Nameplate Specifications |
|||
HP: | 1.5 | Voltage: | Dual (115v / 230v) |
Phase: | 1 | Amps: | 15.4 (115v) / 7.7 (230v) |
RPM: | 1725 | Hz: | 60 |
Frame: | 56c | Service Factor: | 1.15 |
SFA: | 17.6 (115v) / 8.8 (230v) | Type: | C |
AMB: | 40°c | Time: | 15 MIN |
HSG: | TENV | Code: | E |
Insulation: | F | Thermally Protected: | None |
UL: | Recognized | UL Stamp: | C-UL-US |
IP Rating: | IP-54 | ||
Technical Specifications |
|||
Electrical Type: | Capcitor Start | Rotation: | Selective |
Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
Frame Length: | 10.0 in. | Mounting: | Round |
Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
Capacitor SKU #: | BH02246 | Keystock: | Included |
Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
Product Overview
- Stainless Steel Construction with Aluminum End Caps
- Dual-Voltage 120 or 240 operation
- UL and NEMA Recognized
- Totally Enclosed Keeps Bugs Out
- Designed for the Boat Lift Industry
- Removable drain holes at 12:00, 3:00, 6:00 and 9:00
- Gasketed wire access plate and capacitor housing
- BH-USA A-Drive
- BH-USA E-Drive
- AMS E-Drive
- AMS Series Gear Drive
- Golden Boat Lifts SEA DRIVE
- Hi-Tide Gear Drive
- Neptune Boat Lifts
- Tide Tamer Boat Lifts
- DECO Concept Direct Drive Gearbox
- DECO Drive Gearbox