1.5 HP Elite TENV Stainless Bremas Wired Motor
The 1.5 HP Elite TENV Stainless Bremas Wired Motor is a single phase, dual duty motor. The motor is a baseless motor that can be mounted directly onto gearboxes, such as the A-Drive and E-Drive gearboxes, without needing a separate base. Made from stainless steel housing and features aluminum end plates that resist corrosion and rust. The heavy marine-grade gasket on the stainless steel capacitor housing helps keep water and dust out. Easy to wire with standard yellow T-Wires and works with any known drum switch or boat lift remote.
This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.
You can choose between a Bremas maintained (lock-on) or momentary (spring-loaded) boat lift switch. Both switches are connected with 14/5 SJTW control cable, with the in-line GFCI located 4 1/2 inches away from the plug. The type of plug and GFCI wired to the wiring harness depends on your motor voltage selection.
This motor has a power of 1 horsepower (HP) and can run on either 115 volts or 230 volts. At 115 volts, it draws 15.4 amps, and at 230 volts, it draws 7.7 amps. It rotates at a speed of 1725 revolutions per minute (RPM) with a frequency of 60 Hz. It fits into frame 56c and has a service factor of 1.15. It can handle up to 17.6 amps at 115 volts or 8.8 amps at 230 volts. It’s designed to withstand temperatures up to 40°C for a maximum of 15 minutes. The housing is Totally Enclosed Non-Ventilated (TENV) with a code of E. It has insulation class F and is recognized by UL with a C-UL-US stamp.
Totally Enclosed Non-Ventilated (TENV)
A Totally Enclosed Non-Ventilated motor is a type of electric motor that is enclosed to prevent the ingress of foreign particles (dust, moisture, etc.) but does not have external ventilation openings for air circulation. Unlike some other motor types, TENV motors do not rely on external airflow for cooling and are designed to operate in a sealed environment.
Specifications
General Specifications |
|||
---|---|---|---|
Weight: | 37.35 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
Product Length: | 11.75 in. | Product Width: | 6.50 in. |
Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
Shaft Length: | 2 in. | Country of Origin: | China |
Model #: | 93049 | Retail SKU: | 93100 |
Nameplate Specifications |
|||
HP: | 1 | Voltage: | Dual (115v / 230v) |
Phase: | 1 | Amps: | 15.4 (115v) / 7.7 (230v) |
RPM: | 1725 | Hz: | 60 |
Frame: | 56c | Service Factor: | 1.15 |
SFA: | 17.6 (115v) / 8.8 (230v) | Type: | C |
AMB: | 40°c | Time: | 15 MIN |
HSG: | TENV | Code: | E |
Insulation: | F | Thermally Protected: | None |
UL: | Recognized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
Electrical Type: | Capacitor Start | Rotation: | Selective |
Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
Frame Length: | 10.0 in. | Mounting: | Round |
Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
Capacitor SKU #: | BH02246 | Keystock: | Included |
Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
Boat Lift Switch Specifications |
|||
Maintained |
Momentary |
||
Model #: | CA0200034I-B96IQ6R | Model #: | CA0200037I-B96IQ6R |
Retail SKU #: | BH09014 | Retail SKU #: | BH09015 |
Weight: | 1.25 lbs. | Weight: | 1.25 lbs. |
Box Color: | Light Grey | Box Color: | Light Grey |
Housing Length: | 4.5 in. | Housing Length: | 4.5 in. |
Housing Width: | 3.5 in. | Housing Width: | 3.5 in. |
Housing Height: | 4.5 in. | Housing Height: | 4.5 in. |
Handle Color: | Red | Handle Color: | Red |
Handle Length: | 3.0 in. | Handle Length: | 3.0 in. |
Handle Width: | 1.1875 in. | Handle Width: | 1.1875 in. |
Handle Height: | 1.3125 in. | Handle Height: | 1.3125 in. |
Country of Origin: | Italy | Country of Origin: | Italy |
Technical Specifications |
|||
Maintained |
Momentary |
||
Amps: | 20 | Amps: | 20 |
VAC | 600 | VAC | 600 |
Torque: | Tight | Torque: | Tight |
Certification: | EN 60947-3 | Certification: | EN 60947-3 |
Certification: | CE | Certification: | CE |
Certification: | C-UL-US Listed | Certification: | C-UL-US Listed |
GFCI Wire Harness Specifications |
|||
110v |
220v |
||
Manufacturer: | Southwire Company | Manufacturer: | Southwire Company |
Plug Type: | 3-US 110 V Standard | Plug Type: | US 240 Volt NEMA 6-15 |
VAC: | 125 | VAC: | 240 |
Hz: | 60 | Hz: | 50/60 |
Amps: | 15 | Amps: | 15 |
Watts: | 1875 | Watts: | 3600 |
Type: | Rainproof Class A | Type: | Rainproof Class A |
GFCI Type: | In-line | GFCI Type: | In-line |
Cable Type: | 14/5 SJTW | Cable Type: | 14/5 SJTW |
GFCI to Plug: | 4.5 in. | GFCI to Plug: | 4.5 in. |
Cord Diameter Range: | 0.28 – 0.65 in. | Cord Diameter Range: | 0.28 – 0.65 in. |
Country of Origin: | Honduras | Country of Origin: | Honduras |
UL: | Listed | UL: | Listed |
CSA: | Certified | CSA: | Certified |
Reset Button: | Yes | Reset Button: | Yes |
Reset Type: | Automatic | Reset Type: | Automatic |
BH-USA SKU: | 12211 | BH-USA SKU: | 12228 |
Catalog #: | 303385214 | Catalog #: | 25090 |
Product Overview
- Versatile 1.5 HP stainless steel motor
- Dual-voltage, easily convertible by electrician
- Sleek and durable design from China
- NEMA 56 frame, UL Recognized, C-UL-US
- Capacitor start, selective rotation, 1.88" extension
- Boat lift switch options: maintained, momentary
- Italian-made switches, 20A at 600VAC
- Cam diagram illustrates motor performance
- GFCI Wire Harness for 110v, 220v
- UL Listed, CSA Certified for safety