12,000 lb. Aluminum Four Post Pile Mount Lift
Only 1 left in stock
12,000 lb. Aluminum Four Post Pile Mount Lift
The 12,000 lb. Aluminum Four Post Pile Mount Lift mounts on the top of 4 dock pilings. Made from 6061-T6 US aluminum. No weld design. 12,000 lb. lifting capacity.
Includes stainless steel cable, stainless steel mounting fasteners, and hot-dipped galvanized drive pipe. Includes (2) hoists on each top beam. Uses compounded 33 ft. of 7 x 19 aircraft cable. Aluminum cradle beams and bunks included.
Pile mount bracket long bolts to mounting to dock pilings not included.
Freight Shipping Policy
Questions about shipping? Review our shipping policy.
| Lifting Capacity | Gear Ratio | Motor Horsepower | Motor Finish | Piling Amount | Cable Configuration | Cable Thickness | Cable Length |
|---|---|---|---|---|---|---|---|
| 6,000 lbs. | 40:75 | 3/4 HP | Stainless steel | 4 | Straight-Line | 5/16 in. | 15 ft. |
| 8,000 lbs. | 40:75 | 1 HP | Stainless steel | 4 | Straight-Line | 5/16 in. | 15 ft. |
| 9,000 lbs. | 40:75 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 12,000 lbs. | 40:90 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 16,000 lbs. | 40:90 | 1 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 20,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 4 | Compounded | 5/16 in. | 33 ft. |
| 20,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 6 | Compounded | 5/16 in. | 33 ft. |
| 24,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 6 | Compounded | 3/8 in. | 33 ft. |
| 30,000 lbs. | 40:90 | 1 1/2 HP | Stainless steel | 8 | Compounded | 3/8 in. | 36 ft. |
| All aluminum pile mount boat lifts include a BH-USA A-Drive direct-drive hoist and a c-face input wired boat lift motor. | |||||||
Specifications
| Type: | Direct Drive Hoist |
| Capacity: | 12,000 lbs. |
| Cable Diameter: | 5/16 in. |
| Cable Make: | Stainless Steel |
| Cable Length: | 33 ft. |
| Cable Configuration: | Compounded |
| Minimum Piling Size: | 8 in. (diameter) |
| Min. Pile Height (Above Pier): | 4 ft. |
| Electrical: | UL, NEMA, GFCI protected |
| UL File: | E464499 |
| Limit Switch Bracket: | Bracket included (Limit Switch Optional) |
| Weight: | 900-950 lbs. |
| Top Beam Lifting Capacity: | 10,000 lbs / Beam |
| Top Beam Dimensions: | 12 ft. 7 in. L x 3 1/2 in. W x 6 in. H |
| Top Beam Type: | Channel |
| Top Beam Material: | 6061-T6 US aluminum |
| Drive Pipe Finish: | Hot-dipped galvanized |
| Drive Pipe Type: | Sch. 40 |
| Beam Weight: | 4.715 lbs. / ft. |
| Pipe Bearings: | 4 / Beam |
| Pipe Bearings Material: | Bronze |
| Bearing Maintenance | Grease Fittings |
| Grease Fitting Size: | 1/4 in. |
| Cable Winders: | 2 |
| Cable Winder Style: | Side-Mount (Boat Lift Style) |
| Cable Winder Type: | Single Direction |
| Cable Winder Fits: | 1.5 in. ID Drive Pipe |
| Drive Pipe Dimensions: | 12 ft. 4.5 in. L (1,5 in. ID) |
| Fasteners | Stainless Steel |
| Cradle Beam Dimensions: | 12 ft. 6 in. L x 6 in. H x 5 in. Flange |
| Cradle Beam Weight: | 78.83 lbs. |
| Cradle Beam Material: | 6061-T6 US aluminum |
| Sheave Housing Measurements: | 6 in. L x 4 in. W x 5 1/2 in. H |
| Sheave Housing Fits: | 5 in. flange (I-beam) |
| Sheave Housing Fasteners: | 316 stainless steel |
| Sheave Housing Accepts: | 4 in. sheave w/ bronze bushing |
| Sheave Bolt Bore: | 3/4 in. |
| Sheave Housing Material: | 6061-T6 US aluminum |
| Sheave Mounting Hex Head Bolts: | (4) 1/2 in. x 2 1/2 in. stainless steel |
| Sheave Housing Lock Washers: | (4) 1.2 in. stainless steel |
| Sheave Housing Nuts: | (4) 1/2 in. stainless steel |
| Cradle Bunk Dimensions: | 14 ft. x 8 in. H x 5 in. flange |
| Max Flange Size: | 5 in. Flange |
| Angle: | 19 degrees |
| Weight: | 2.898 lbs. / linear ft. |
| Material: | 6061-T6 US aluminum |
| Padding: | Rubber |
| Padding Color: | Black |
| Boat Hoist Rated Capacity: | 7,000 lbs. |
| Tested Capacity: | Straight line |
| Gear Plate Dimensions: | 12.42 in. L x 7.56 in. W x 14.57 in. H |
| Bull Gear Ratio: | 450:1 |
| Motor Type: | C-Face |
| Motor Flange to Driveshaft Flange Offset: | 1.22 in. |
| Output Shaft Size: | 1 1/4 in. |
| Input Motor Shaft Size: | 5/8 in. |
| Motor Shaft to Drivepipe Shaft: | 7.26 in. |
| Gear Type: | 40:90 |
| Max Run Time: | 15 Minutes |
| Dimensions: | 9 in. x 10 1/2 in. x 6 1/4 in. |
| Horsepower: | 1 |
| Mounting Type: | C |
| RPM: | 1725 |
| Service Factor: | 1.15 |
| Voltage: | 115v / 230v |
| Phase: | 1 |
| Amps: | 7.8 |
| SFtartA: | N/A |
| Herz: | 60 |
| AMB: | 40c |
| Frame: | 56c |
| HSG: | TENV |
| Code: | L |
| Insulation: | A |
| Shaft Diameter | 5/8 in. |
Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility.
Product Overview
- Features no weld design
- Made from marine grade 6061-T6 US aluminum
- Rated up to 12,000 lb. lift capacity
- Includes aluminum cradle beams and bunks
- All stainless steel mounting fasteners
- Includes (2) hoists mounted on the aluminum top beams
