35,000 lb. Aluminum Eight Post Pile Mount Lift
35,000 lb. Aluminum Eight Post Pile Mount Lift
The 35,000 lb. Aluminum Eight Post Pile Mount Lift includes (4) 40:90 Double Worm Reducer, (4) 220v wired motors, (4) pile mount top beams, boat cradle, and aluminum bunks. A complete lift in a crate. The all-aluminum lift features an industry-leading no-weld design. It uses hardened marine-grade stainless steel fasteners. The extrusions make it the most reliable and strongest lift in the industry.
Made from 6061-T6 US aluminum. The motors are wired with a Bremas maintained drum switch and in-line GFCI with a 220v plug. Two 1 1/2 HP stainless steel motors are wired with a 16 ft. control cable and the other two are wired with a 45 ft. control cable. Allows mounting drum switches together. Measures 72 in. from outside to outside of the top beams.
Requires 8 pilings with a minimum of 10 in. diameter.
Pile Mount brackets included.
Piling mount fasteners not included.
Specifications
| Lifting Capacity: | 35,000 lbs. |
| Pilings Required: | 8 |
| Piling Diameter Minimum: | 10 in. |
| Min. Pile Height (Above Pier): | 4 ft. |
| Pile Mounting Bolts: | Not included |
| Pile Mount Brackets: | Included |
| Top Beam Length: | 72 in. (outside to outside) |
| Top Beam Amount: | 4 |
| Cable Winders: | 2 (per top beam) |
| Cable Winder Style: | Single directional |
| Cable Diameter: | 3/8 in. |
| Cable Make: | 7 x 19 aircraft cable |
| Cable Material: | Stainless steel |
| Cable Length: | 36 ft. |
| Cable Sections: | 2 (per beam) |
| Cable Configuration: | Compounded (2 part) |
| Pipe Bearing: | Bronze |
| Pipe Bearing Amount: | 4 (per top beam) |
| Bearing Maintenance: | Grease-able |
| Aluminum Cradle Dimensions: | 18 ft. L x 10 in. Web x 6 in. Flange |
| Cradle Beam Weight: | 10.29 / linear ft. |
| Fasteners: | Stainless steel |
| Bunk Material: | Aluminum |
| Bunk Material Style: : | 6061-T6 US |
| Bunk Type: | Cradle |
| Length: | 10 ft. |
| Padding Material: | Rubber |
| Padding Design: | Non-marking |
| Padding Color: | Black |
| Bunk Height: | 8 in. (5 in. Flange) |
| Bunk Angle: | 19 degrees |
| 8 in. Cradle Bunk Weight: | 2.898 lbs. / linear ft. |
| Aluminum Sheave Housing Dimensions: | 7 in. x 4 in. x 5/12 in. |
| Sheave Housing Rating: | 2.5 ton (based on I-beam rating) |
| Sheave Size: | 4 in. |
| Lift Size: | 7,000 lbs. |
| Motor HP: | 1 1/2 HP |
| Motor Finish: | Stainless Steel |
| Motor Brand: | Elite |
| Gearbox Type: | Double worm reducer |
| Gearbox Input: | Direct drive |
| Gearbox Weight: | 38.3 lbs. |
| Gearbox Material: | Aluminum |
| Gearbox Finish: | Silver |
| Gear Type: | 40:90 configuration |
| Actual Ratio: | 450:1 |
| Lubrication: | Specially blended gear grease |
| Lubrication Application: | Permanently sealed in the gearbox |
| Motor Flange to Driveshaft Flange Offset: | 1.22 in. |
| Overall Dimensions: | 11.16 in. L x 7.21 in. W x 13.23 in. H |
| Output Shaft Size: | 1 1/4 in. |
| Input Motor Shaft Size: | 5/8 in. |
| Motor Shaft to Drive Pipe Shaft: | 6.59 in. |
| Drive Pipe Mounting Bolt Size: | (4) .55 in. |
| Drive Pipe Bolt Mount Hole to Bolt Mount Hole: | 4.59 in. |
| Driveshaft Gearbox Dimensions: | 8.07 in. L x 5.04 in. W x 6.77 H |
| Motor Mounting Type: | C-Face |
| Motor Mounting Bolt Size: | (4) 7/16 in. |
| Motor Bolt Mount Hole to Bolt Mount Hole: | 4.15 in. |
| Motor Gearbox Dimensions: | 4.78 L x 3.94 in. W x 3.37 in. H |
| Motor A-Drive Output Torque: | 7,399 lbs./in. |
| Maximum Run Time: | 15 minutes |
| Motor Dimensions: | 9 in. x 10 1/2 in. x 6 1/4 in. |
| Weight: | 39.65 lbs. |
| Horsepower: | 1 1/2 HP |
| Mounting Type: | C |
| RPM: | 1725 |
| Service Factor: | 1.15 |
| SFA: | 8.8 (220v) |
| Voltage: | 220v |
| Phase: | 1 |
| Amps: | 7.7 |
| Herz: | 60 |
| AMB: | 40°C |
| Frame: | 56C |
| HSG: | TENV |
| Code: | E |
| Insulation: | F |
| Shaft Diameter: | 5/8 in. |
| Dimensions: | 3 1/2 in. x 4 1/2 in. x 4 1/2 in. |
| Max Amps: | 20 |
| Max HP: | 1 1/2 HP |
| Compliance: | UL, NEMA, CE, SA |
| VAC: | 120-240 |
| Weight: | 1.2 lbs. |
| Box Color: | Gray |
| Handle Color: | Red |
| Switch Type: | Maintained (Lock-On) |
| Housing Material: | Plastic |
| Plug Type | 3-US 110 V Standard |
| Plug Cord Length | 6 in. |
| GFCI to Switch Cord Length | 6 ft. |
| GFCI: | 7 in. x 2 1/2 in. x 1 in. |
| Color: | Black |
| Class: | A-Rainproof |
| AMP: | 15 |
| Hz: | 60 |
| Watt | 1875 |
| Volt | 125 |
| Reset Type | Automatic |
| Cord Diameter Range | .28 – .65 |
| Electrical: | UL, NEMA, GFCI Protected |
| UL File: | E464499 |
| Limit Switch Bracket: | Bracket Included (Limit Switch Optional) |
| Packaging: | 15 ft. x 2 ft. x 2 ft. Wood Crate |
| Shipping Weight: | 1,350 lbs. |
Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility.
Product Overview
- Features no-weld construction
- Made from 6061-T6 US aluminum
- Uses stainless steel fasteners
- Uses (4) 1/2 HP 220v stainless steel motors w/ drum switch & GFCI
- Mounts on (8) pilings of 10 in. or larger
- Heavy-duty boat lift
- Made in the USA
